microperforated paper joint tape 50 mm x 75 m
12,673 DT/TTC
DariPro catalogue
Plasterboard and ceiling accessories in Tunisia
DariPro supplies accessories for plasterboard, partition and ceiling systems. Find fixing, finishing, access and complementary components suited to each solution.
Accessories
34 products available
Akifix microperforated paper joint tape 50 mm x 23 m
6,828 DT/TTC
Akifix 3D paper joint tape 150 m
22,441 DT/TTC
Akifix fibreglass joint tape 48 mm x 153 m
34,326 DT/TTC
Akifix fibreglass joint tape 48 mm x 90 m
21,713 DT/TTC
Akifix metal-reinforced corner tape 30 m
39,601 DT/TTC
Perfilkit 70 mm x 30 m self-adhesive acoustic tape
45,472 DT/TTC
Perfilkit 50 mm x 30 m self-adhesive acoustic tape
32,055 DT/TTC
Exterior TTPF screws 31 x 4.1 mm – box of 200
31,183 DT/TTC
Akifix 25 x 3.5 mm TTPC – box of 1000
27,150 DT/TTC
Akifix 35 x 3.5 mm TTPC – box of 1000
43,906 DT/TTC
TEKS screws 9.5 x 3.5 mm – box of 1000
20,885 DT/TTC
EXTERIOR FIBERGLASS ROLL
145,350 DT/TTC
Akifix M6 brass anchor for threaded rods – box of 100
42,288 DT/TTC
Akifix 15 cm closed-eye butterfly anchor
91,651 DT/TTC
IFOM M6 toggle hanger with rosette – box of 100
47,055 DT/TTC
0/10 pivot hanger for F47 furring channel
30,180 DT/TTC
Akifix 6/10 double spring – box of 100
40,323 DT/TTC
Akifix M8 threaded rod clip for 10-15 mm – box of 100
134,068 DT/TTC
Akifix M6 threaded rod clamping clip 4 to 10 mm
121,012 DT/TTC
Perfilkit 480 mm universal hanger for suspended ceilings
67,719 DT/TTC
Perfilkit F47 furring channel connectors – box of 50
20,883 DT/TTC
M6 galvanized threaded rod coupler – box of 100
22,436 DT/TTC
Perfilkit M6 multi-purpose half clamp
52,292 DT/TTC
Akifix Ø4 mm 2 m smooth rod – box of 100
2,370 DT/TTC
M6 galvanized nut for toggle hangers – box of 100
3,300 DT/TTC
120 x 60 cm access panel
220,165 DT/TTC
60 x 60 cm access panel
107,068 DT/TTC
20 x 20 cm access panel
60,000 DT/TTC
Akifix Ø6 x 38 mm hammer-in anchors – box of 200
21,200 DT/TTC
Joint tapes, fixings and ceiling accessories
Complete your board and profile order with suitable accessories. Paper or glass-fibre tapes, fixings, hangers and access panels must match the system and access or finishing requirements.
How do I choose between paper and glass-fibre tape?
Check the manufacturer’s specified combination of tape, boards and compound. Also compare roll width and length. The two tape types are not automatically interchangeable.
How do I select an access panel?
Measure the required opening and check the ceiling or partition construction. Confirm clear opening dimensions, fixing method and any technical requirements before ordering.